Cleans and Brightens

Spray Cleaner On

It Does The Work

Cleaning Acoustical And Drop Ceilings

Spectrum Cleans Acoustical - Textured - Drop Type Ceilings

[ Home ] [ Contact Us ] [ Company News ] [ M S D S ] [ Information Request ] [ F A Q ]

Prices - Ordering

Product Info

Cleaning Tips

B2B Home Page

Main Home Page

----------

Ceiling Applications

Textured Ceilings

Drop Ceilings

Water Spots

----------

Ceiling Brochure

To save to your system, click the Floppy Disk Icon

Get Adobe Reader

  Spectrum ceiling cleaner formulation is used for cleaning and brightening your acoustical ceilings, including the drop type.   You easily mix our concentrate with standard 3% Hydrogen Peroxide plus water creating the industrial quality ceiling cleaner.   Our unique formula easily removes stains, including kitchen grease and cigarette smoke by simply lightly spraying on surface and allowing cleaner to work via the oxidization process.

  No need for special equipment - use a clean spray bottle or garden type pump sprayer for large rooms!  Ceiling material / tiles are not touched - ceiling cleaner is absorbed into material.  This is the perfect time to get them looking new again.

  Your ceiling will be Clean and Brighter, when dry - tiles go back to the original color. Since this mixture is an oxidizer, Safety Glasses must be worn when spraying overhead and kept away from windows and eye glasses. 

User E-Mails: Click Here 

Orders include: Cleaning Tips, Mixing Guidelines, MSDS, and Sprayer Labels. 

  A 2 Liter of Spectrum concentrate will clean a minimum 800 sq. feet.  Here are just a few of its benefits and capabilities.             More Info

*Download our PDF Ceiling Brochure on the left - Includes square footage calculation. 

Key Features

• Safe - Non Toxic - Non Flammable - Biodegradable Mixture

• Simple - Easy - DIY No special tools needed

• Spray on surface - dirt, grease and stains are removed by cleaner

• Works on your acoustical drop type ceilings and tracks

• Economical: Add Cleaner + Hydrogen Peroxide + Water

• Concentrate: Spectrum Gallon makes Eight Gallons of ceiling cleaner

Spectrum Capabilities

Acoustical Ceilings

Spectrum ceiling cleaner mixture should be sprayed lightly on surface, making sure it is uniformly covered.  Wait an hour or so and your ceiling will be clean and brighter.  The ceiling cleaning formula is the key - you do not touch the surface, especially the textured type ceilings or tiles.  Grease - dirt - smoke are oxidized (burned up), leaving a clean white ceiling when dry.  No time consuming masking of walls or molding is required - simply wipe off solution overspray and metal tracks.

Drop Type Ceilings

Test a single tile to make sure no chemical reaction occurs.  Ceiling cleaner mixture should be sprayed lightly on surface, making sure it is uniformly covered as described above - two light coats work best.  Metal tracks should be wiped or blotted to prevent spotting.  Dirt and stains are removed, leaving a clean ceiling when dry.  Removal of water spot damage will require pre-treating with Bleach Mixture - full pamphlet instructions are included with orders.

Ceiling Vents - Black Residue On Ceiling

 This is an extremely tough stain to remove! Spectrum is mixed with Clorox® Bleach and water (mixing ratio included) - spray on stain to pre-treat - allow mixture to work 15 - 30 minutes, then spray on the heavy duty ceiling mixture and allow it to work. Repeat above procedure if necessary.  You may also try blotting the stain, if possible with your particular ceiling tile.  Note:  Heavily stained areas may not come out completely.

Silk Plants

Hydrogen Peroxide cleaner should be mixed light - evenly spray a light coating onto plant surface - allow to work 30 minutes, then rinse or blot dry droplets - results in clean and bright plant when dried.